| Calibration coefficients for this equation |
ser# = 3863 temperature coeffs: A0 = 0.0001 A1 = 0.0003 A2 = -0.0000 A3 = 0.0000 |
| Calibration coefficients for this equation |
ser# = 3863 pressure coeffs: PA0 = -0.69055 PA1 = 0.14091 PA2 = -4.2725e-08 PTCA0 = 48.169 PTCA1 = -0.26053 PTCA2 = 0.0015421 PTCB0 = 25.151 PTCB1 = -0.00025 PTCB2 = 0 PTHA0 = -76.896 PTHA1 = 0.048759 PTHA2 = -2.8669e-07 |
| Calibration coefficients for this equation |
ser# = 3863 conductivity coeffs: G = -0.9839 H = 0.1469 I = -0.0004 J = 0.0001 CPCOR = -0.0000 CTCOR = 0.0000 WBOTC = -0.0000 |
| Calibration equation for this parameter |
f = inst freq * sqrt(1.0 + WBOTC * t) / 1000.0; t = temperature [deg C]; p = pressure [decibars]; delta = CTcor; epsilon = CPcor; Conductivity = (g + hf^2 + if^3 + jf^4)/(1+ delta t + epsilon p) Siemens/meter |
| Calibration equation for this parameter |
Temperature ITS-90 = 1/ { a0 + a1[lambda nu (n)] + a2 [lambda nu^2 (n)] + a3 [lambda nu^3 (n)]} - 273.15 (deg C) |
| Calibration equation for this parameter |
y=thermistor output; t=PTHA0+PTHA1*y+PTHA2*y^2; x=pressure output-PTCA0+PTCA1*t+PTCA2*t^2; n=x*PTCB0/(PTCB0+PTCB1*t+PTCB2*t^2); pressure (psia)=PA0+PA1*n+PA2*n^2 |
| Data centre in charge of platform data processing |
CS |
| Date (UTC) of the first descent of the float. |
26/01/2012 22:43:30 |
| Date of last update of the metadatas of the platform |
25/05/2012 13:12:48 |
| Date of last update of the trajectory of the platform |
24/05/2012 18:10:11 |
| Direction of the profiles |
A |
| Identifier of the deployment platform |
aurora australis |
| Instrument type |
APEX-SBE 5941 |
| List of parameters with calibration information |
TEMP |
| List of parameters with calibration information |
CNDC |
| List of parameters with calibration information |
PRES |
| List of sensors on the float |
PRES |
| List of sensors on the float |
CNDC |
| List of sensors on the float |
TEMP |
| Model of the float |
APEX-SBE |
| Name of the principal investigator |
Susan Wijffels |
| Platform activity flag |
A |
| Positioning system |
GPS |
| Profiler EXPERIMENT ID |
Argo AUSTRALIA |
| Profiler LAUNCH DATETIME |
26/01/2012 00:29:00 |
| Profiler LAUNCH LATITUDE |
-58.6 |
| Profiler LAUNCH LONGITUDE |
114.98 |
| Profiler PROBE CODE |
846 |
| Quality on launch date, time and location |
1 |
| Quality on start date |
1 |
| The accuracy of the sensor |
0.005 |
| The accuracy of the sensor |
0.002 |
| The accuracy of the sensor |
2.4 |
| The deepest pressure sampled in the ascending profile |
2000 |
| The last valid station id of the platform |
26156206 |
| The name of the manufacturer |
SEABIRD |
| The name of the manufacturer |
SEABIRD |
| The name of the manufacturer |
SEABIRD |
| The name of the manufacturer |
Webb research |
| The number of times this cycle repeats |
1 |
| The pressure of subsurface drifts |
1000 |
| The program identifier used by the transmission system |
02039 |
| The related loading id |
9894764 |
| The resolution of the sensor |
-0.0001 |
| The resolution of the sensor |
0 |
| The resolution of the sensor |
1e-05 |
| The serial number of the sensor |
3265416 |
| The serial number of the sensor |
3863 |
| The serial number of the sensor |
3863 |
| The telecommunications system used |
IRIDIUM |
| The time spent at the parking pressure |
224.88 |
| The time spent at the surface |
1 |
| The time spent sampling the ascending profile |
6.94 |
| The total time of a cycle : descent + parking + ascent + surface |
240 |
| The units of accuracy and resolution of the sensor |
Siemens/meter |
| The units of accuracy and resolution of the sensor |
decibars |
| The units of accuracy and resolution of the sensor |
deg C |
| Transmission identifier (ARGOS, ORBCOMM, etc.) |
7626 |
| Type of sensor |
sbe 41cp v2.0 |
| Type of sensor |
DRUCK |
| Type of sensor |
sbe 41cp v2.0 |
