On September 13th 2017,one document was added on Argo data management documentation page
-
BGC-Argo processing Argo measurement timing information at the DAC level, March 2017
http://dx.doi.org/10.13155/47998
On September 12th 2017, the Argo User's manual was updated.
The updates are listed on page 13 in the “History of the document” section
- Page 2: replace the obsolete “Authors” list with “Argo data management team”. The DOI landing page lists the contributors.
- §4.1 note on cycle numbers greater than 999
- §3.2.1 QC flag 8, replace “interpolated” with a more general “estimated”.
- §2.4.6.3 add a chapter “highly desirable configuration parameters”
- §2.6.8 Parameter names on 64 characters
- §2.6.10 Predeployment calibration variable dimension, when necessary (such as for Nitrate sensor), the string length is set to 4096.
- §2.6.3 clarification PARAM_QC do not have a N_VALUES dimension
- §2.6.7 clarification on *_ADJUSTED, *_ADJUSTED_QC, and *_ADJUSTED_ERROR. They are optional as a group they must either all be present or all be absent
- §3.5 Reference table 5 “Location classes” : add “A”, “B” and “Z” Argos location classes
- §4.1.1 Note on <R/D> in profile file name
- §2.7.1 Note on date or position with a bad quality control flag in index files
- §3.25 §3.26 §3.27 update SENSOR, SENSOR_MAKER and SENSOR_MODEL according to their online content
On April 21th 2017, this table was updated on Argo data management documentation page
Changes detail:
- Line 69 : updated definition
- New labels inserted on lines 16, 29, 70, 71, 76, 77, 78, 105 and 165.
On January 4th 2017, these tables were updated on Argo data management documentation page
-
Configuration parameter names, core Argo, January 4th 2017 55.76 kB -
Configuration parameter names, BGC-Argo, January 4th 2017 16.70 kB
-
Technical parameters names, version 7.8, January 4th 2017 77.31 kB
On September 27th 2016,this table was updated:
On September 15th, two documents were added/updated on Argo data management documentation page
-
The valid version 2.4 of the FileChecker document (in the Cookbooks section)
http://doi.org/10.13155/46120 -
Configuration parameter names, BGC-Argo, July 12th 2016 15.94 kB
On September 14th, two documents were added on the Draft documents page
-
Description of the Argo GDAC File Checks
http://doi.org/10.13155/46120 -
Processing Bio-Argo nitrate concentration at the DAC Level
http://dx.doi.org/10.13155/46121
On August 17th, this document was updated on Argo data management documentation page:
On May 13th, this document was updated on Argo data management documentation page:
On May 12th 2016, these documents were updated on Argo data management documentation page.
- Configuration parameter names, bio-Argo, May 11th 2016
-
Technical parameters names, version 7.7, August 24th 2016 71.24 kB
-
Configuration parameter names, core Argo, May 11th 2016 44.49 kB
-
Technical and configuration parameters units, version 2.3, May 11th 2016 12.53 kB
In March 2016, these documents were updated on Argo data management documentation page.
-
Technical and configuration parameters units, version 2.3, May 11th 2016 12.53 kB
-
Technical parameters names, version 7.7, August 24th 2016 71.24 kB
In January and February 2016, the following documents were updated on Argo data management documentation page.
-
Configuration parameter names, core Argo, May 11th 2016 44.49 kB
-
Argo physical parameters list: Core-Argo and BGC-Argo, February 2nd 2016 155.70 kB
-
Technical parameter units, version 2.1, June 30th 2015 12.25 kB
These documents are listed on: